Specifies how to determine the billing day for the charge.

Notes:

• If you set this field to SpecificDayofMonth, you must specify which day of the month as the billing day for the charge in the BillCycleDay field.
• If you set this field to SpecificDayofWeek, you must specify which day of the week as the billing day for the charge in the WeeklyBillCycleDay field.
• By default, TermStartDay and TermEndDay are only available for prepayment charges. But you can reach out to Zuora Global Support to request enabling it for non-prepaid recurring charges. Meanwhile, note the following rules applies to these options:
  • The Term End Day option of the Billing Day field must be coupled with the Align to Term End option of the Billing Period Alignment field.
  • For prepaid charges, the Term Start Day option of the Billing Day field must be coupled with the existing Align to Term Start option of the Billing Period Alignment field.
  • For non-prepaid recurring charges: If Billing Day is set to Term Start Day, Billing Period Alignment must be Align to Term Start; If Billing Day is set to Term End Day, Billing Period Alignment can be set to other values.

The billing period for the charge. The start day of the billing period is also called the bill cycle day (BCD).

Notes:

• Specify the number of months or weeks in the SpecificBillingPeriod field if you set this field to Specific Months or Specific Weeks.
• The Subscription Term value is in Limited Availability.

Determines how to calculate charges. Charge models must be individually activated in Zuora Billing administration.

Notes:

• The Delivery Pricing value is available only if you have the Delivery Pricing charge model enabled.
• The MultiAttributePricing value is available only if you have the Multi-Attribute Pricing charge model enabled. The charge model is available for customers with Enterprise and Nine editions by default. If you are a Growth customer, see Zuora Editions for pricing information.
• The PreratedPerUnit and value is available only if you have the Pre-rated Per Unit Pricing charge model enabled. The charge model is available for customers with Enterprise and Nine editions by default. If you are a Growth customer, see Zuora Editions for pricing information.
• The PreratedPricing value is available only if you have the Pre-rated Pricing charge model enabled. The charge model is available for customers with Enterprise and Nine editions by default. If you are a Growth customer, see Zuora Editions for pricing information.
• The HighWatermarkVolumePricingvalue is available only if you have the High Water Mark Volume Pricing charge model enabled. The charge model is available for customers with Enterprise and Nine editions by default. If you are a Growth customer, see Zuora Editions for pricing information.
• The HighWatermarkTieredPricing value is available only if you have the High Water Mark Tiered Pricing charge model enabled. The charge model is available for customers with Enterprise and Nine editions by default. If you are a Growth customer, see Zuora Editions for pricing information.

Specifies the type of charge.

The name of the product rate plan charge.

Container for pricing information associated with the product rate plan charge.

The ID of the product rate plan associated with this product rate plan charge.

Specifies when to start billing the customer for the charge.

Values:

• ContractEffective is the date when the subscription's contract goes into effect and the charge is ready to be billed.
• ServiceActivation is the date when the services or products for a subscription have been activated and the customers have access.
• CustomerAcceptance is when the customer accepts the services or products for a subscription.

Determines whether to define a new accounting code for the new discount charge.

Character limit: 5

Values: True, False

The accounting code for the charge. Accounting codes group transactions that contain similar accounting attributes.

Specifies the type of charges that you want a specific discount to apply to. All field values are case sensitive and in all-caps.

Sets the bill cycle day (BCD) for the charge. The BCD determines which day of the month customer is billed. The BCD value in the account can override the BCD in this object.

Character limit: 2

Values: a valid BCD integer, 1 - 31

Aligns charges within the same subscription if multiple charges begin on different dates.

Note: The AlignToTermEnd value is only available for prepayment charges by default. Reach out to Zuora Global Support to enable it for non-prepaid recurring charges.

The billing timing for the charge. You can choose to bill in advance or in arrears for recurring charge types. This field is not used in one-time or usage based charge types.

This feature is in Limited Availability. If you wish to have access to the feature, submit a request at Zuora Global Support.

Note: This field is only available if you have the Unbilled Usage feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 141 or higher. Otherwise, an error occurs.

This field defines what type of charge it is in Advanced Consumption Billing:

• Standard: Normal charge with no Prepayment or Commitment or Drawdown.
• Prepayment: For recurring charges. Unit or currency based prepaid charge.
• CommitmentTrueUp: For recurring charges. Currency based minimum commitment charge.
• Drawdown: For usage charges. Drawdown from prepaid funds.
• DrawdownAndCreditCommitment: For usage charges. Drawdown from prepaid funds and then credit to minimum commitment funds.
• CreditCommitment: For usage charges. Credit to minimum commitment funds.

Note: This field is only available if you have the Unbilled Usage feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 133 or higher. Otherwise, an error occurs.

This field defines the type of commitment. A prepaid charge can be UNIT or CURRENCY. A minimum commitment(in-arrears) charge can only be CURRENCY type. For topup(recurring or one-time) charges, this field indicates what type of funds are created.

• If UNIT, it will create a fund with given prepaidUom.
• If CURRENCY, it will create a fund with the currency amount calculated in list price.

For drawdown(usage) charges, this field indicates what type of funds are drawdown from that created from topup charges.

Container for charge model configuration data.

Notes:

• This field is only available if you have the Pre-Rated Pricing or Multi-Attribute Pricing charge models enabled. These charge models are available for customers with Enterprise and Nine editions by default. If you are a Growth customer, see Zuora Editions for pricing information.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 102 or later. Otherwise, an error occurs with "Code: INVALID_VALUE".

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The way to calculate credit. See Credit Option for more information.

The default quantity of units, such as the number of authors in a hosted wiki service. This field is required if you use a per-unit pricing model.

Character limit: 16

Values: a valid quantity value.

Note: When the ChargeModel field is set to Tiered Pricing or Volume Pricing, if this field is not specified, the value will default to 0.

The name of the deferred revenue account for this charge.

This feature is in Limited Availability. If you wish to have access to the feature, submit a request at Zuora Global Support.

A description of the charge.

Specifies if the discount applies to just the product rate plan, the entire subscription, or to any activity in the account.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The conversion rate between Usage UOM and Drawdown UOM for a drawdown charge. See Fields related to Prepaid with Drawdown for more information.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

Unit of measurement for a drawdown charge.

Defines when the charge ends after the charge trigger date.

Values:

• SubscriptionEnd: The charge ends on the subscription end date after a specified period based on the trigger date of the charge.
• FixedPeriod: The charge ends after a specified period based on the trigger date of the charge. If you set this field to FixedPeriod, you must specify the length of the period and a period type by defining the UpToPeriods and UpToPeriodsType fields.

Note: If the subscription ends before the charge end date, the charge ends when the subscription ends. But if the subscription end date is subsequently changed through a Renewal, or Terms and Conditions amendment, the charge will end on the charge end date.

The flag to exclude the related invoice items, invoice item adjustments, credit memo items, and debit memo items from revenue accounting.

Notes:

• To use this field, you must set the X-Zuora-WSDL-Version request header to 115 or later. Otherwise, an error occurs.
• This field is only available if you have the Order to Revenue or Billing - Revenue Integration feature enabled.

The flag to exclude the related rate plan charges and order line items from revenue accounting.

Notes:

• To use this field, you must set the X-Zuora-WSDL-Version request header to 115 or later. Otherwise, an error occurs.
• This field is only available if you have the Order to Revenue or Billing - Revenue Integration feature enabled.

Specifies the number of units in the base set of units.

Character limit: 16

Values: a positive decimal value

Indicates whether the charge segment is allocation eligible in revenue recognition. The default value is False.

Values: True, False

Notes:

• This field is available only if you have the Additional Revenue Fields property enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 132 or later.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

Indicates whether this charge is a prepayment (topup) charge or a drawdown charge.

Values: true or false.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The value is either "True" or "False". It determines whether the rollover fields are needed.

Note: This field is only applicable to the Discount - Percentage charge model.

To use this field, you must set the X-Zuora-WSDL-Version request header to 130 or higher. Otherwise, an error occurs.

This field indicates whether the discount is to be calculated as stacked discount. Possible values are as follows:

• True: This is a stacked discount, which should be calculated by stacking with other discounts.
• False: This is not a stacked discount, which should be calculated in sequence with other discounts.

For more information, see Stacked discounts.

Specifies how to perform the accounting during revenue recognition. The default value is False.

Values: True, False

Notes:

• This field is available only if you have the Additional Revenue Fields property enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 132 or later.

The list price base for the product rate plan charge.

Specifies the maximum number of units for this charge. Use this field and the MinQuantity field to create a range of units allowed in a product rate plan charge.

Character limit: 16

Values: a positive decimal value

Specifies the minimum number of units for this charge. Use this field and the MaxQuantity field to create a range of units allowed in a product rate plan charge.

Character limit: 16

Values: a positive decimal value

Specifies the number of periods to use when calculating charges in an overage smoothing charge model. The valid value is a positive whole number.

Determines when to calculate overage charges. If the value of the SmoothingMode field is not specified, the value of this field is ignored.

Values:

• EndOfSmoothingPeriod: This option is used by default. The overage is charged at the end of the smoothing period.
• PerBillingPeriod: The overage is charged on-demand rather than waiting until the end of the smoothing period.

Determines whether to credit the customer with unused units of usage.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The type of this charge. It is either a prepayment (topup) charge or a drawdown charge.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The number of units included in a prepayment charge. Must be a positive number.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The total amount of units that end customers can use during a validity period when they subscribe to a prepayment charge.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

Unit of measurement for a prepayment charge.

Applies an automatic price change when a termed subscription is renewed.

Applies an automatic price change when a termed subscription is renewed.

Specifies the percentage to increase or decrease the price of a termed subscription's renewal. Use this field if you set the value to SpecificPercentageValue.

Character limit: 16

Values: a decimal value between -100 and 100

This field is used to maintain the product category for integration with Zuora Revenue.

Notes:

• This field is available only if you have the Additional Revenue Fields property enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 132 or later.

This field is used to maintain the product class for integration with Zuora Revenue.

Notes:

• This field is available only if you have the Additional Revenue Fields property enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 132 or later.

This field is used to maintain the product family for integration with Zuora Revenue.

Notes:

• This field is available only if you have the Additional Revenue Fields property enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 132 or later.

This field is used to maintain the product line for integration with Zuora Revenue.

Notes:

• This field is available only if you have the Additional Revenue Fields property enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 132 or later.

Specifies the type of revenue recognition timing.

Predefined options are listed as enum values in this API Reference. Other options might also be avaliable depending on the revenue recognition policy configuration in the Zuora Billing UI.

Note: This field is only available if you have the Order to Revenue feature enabled.

Specifies the type of revenue amortization method.

Predefined options are listed as enum values in this API Reference. Other options might also be avaliable depending on the revenue recognition policy configuration in the Zuora Billing UI.

Note: This field is only available if you have the Order to Revenue feature enabled.

The natural key of the product rate plan charge.

Values:

• leave null for automatically generated string
• an alphanumeric string of 100 characters or fewer

Note: This field is only available if you set the X-Zuora-WSDL-Version request header to 133 or later.

Specifies a rating group based on which usage records are rated.

Possible values:

• ByBillingPeriod: The rating is based on all the usages in a billing period.
• ByUsageStartDate: The rating is based on all the usages on the same usage start date.
• ByUsageRecord: The rating is based on each usage record.
• ByUsageUpload: The rating is based on all the usages in a uploaded usage file (.xls or .csv).
• ByGroupId: The rating is based on all the usages in a custom group.

Notes:

• The ByBillingPeriod value can be applied for all charge models.
• The ByUsageStartDate, ByUsageRecord, and ByUsageUpload values can only be applied for per unit, volume pricing, and tiered pricing charge models.
• The ByGroupId value is only available if you have the Active Rating feature enabled.
• Use this field only for Usage charges. One-Time Charges and Recurring Charges return NULL.

The name of the recognized revenue account for this charge.

• Required when the Allow Blank Accounting Code setting is No.
• Optional when the Allow Blank Accounting Code setting is Yes.

This feature is in Limited Availability. If you wish to have access to the feature, submit a request at Zuora Global Support.

Associates this product rate plan charge with a specific revenue recognition code.

Specifies when revenue recognition begins.

Determines when to recognize the revenue for this charge.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

This field defines the priority of rollover, which is either first or last.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

This field defines the number of rollover periods, it is restricted to 3.

Specifies the smoothing model for an overage smoothing charge model.

Customizes the number of months or weeks for the charges billing period. This field is required if you set the value of the BillingPeriod field to Specific Months or Specific Weeks. The valid value is a positive integer.

The number of months for the list price base of the charge. This field is required if you set the value of the ListPriceBase field to Per Specific Months.

Notes:

• This field is available only if you have the Annual List Price feature enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 129 or later. Otherwise, an error occurs.
• The value of this field is null if you do not set the value of the ListPriceBase field to Per Specific Months.

Specifies the tax code for taxation rules. Required when the Taxable field is set to True.

Note: This value affects the tax calculation of rate plan charges that come from the ProductRatePlanCharge.

Determines how to define taxation for the charge. Required when the Taxable field is set to True.

Note: This value affects the tax calculation of rate plan charges that come from the ProductRatePlanCharge.

Determines whether the charge is taxable. When set to True, the TaxMode and TaxCode fields are required when creating or updating th ProductRatePlanCharge object.

Character limit: 5

Values: True, False

Note: This value affects the tax calculation of rate plan charges that come from the ProductRatePlanCharge.

Specifies a configured unit to measure usage.

Note: You must specify this field when creating the following charge models:

• Per Unit Pricing
• Volume Pricing
• Overage Pricing
• Tiered Pricing
• Tiered with Overage Pricing

Specifies the length of the period during which the charge is active. If this period ends before the subscription ends, the charge ends when this period ends.

Character limit: 5

Values: a whole number between 0 and 65535, exclusive

Notes:

• You must use this field together with the UpToPeriodsType field to specify the time period. This field is applicable only when the EndDateCondition field is set to FixedPeriod.
• If the subscription end date is subsequently changed through a Renewal, or Terms and Conditions amendment, the charge end date will change accordingly up to the original period end.

The period type used to define when the charge ends.

Notes:

• You must use this field together with the UpToPeriods field to specify the time period.
• This field is applicable only when the EndDateCondition field is set to FixedPeriod.

Determines how Zuora processes usage records for per-unit usage charges.

Applies the tenant-level percentage uplift value for an automatic price change to a termed subscription's renewal.

Character limit: 5

Values: true, false

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 114 or higher. Otherwise, an error occurs.

The period in which the prepayment units are valid to use as defined in a prepayment charge.

Specifies which day of the week as the bill cycle day (BCD) for the charge.

This feature is in Limited Availability. If you wish to have access to the feature, submit a request at Zuora Global Support.

Allow the discount duration to be aligned with the billing period partially.

Note: You must enable the Enhanced Discount feature to access this field.

Note: This field is only available if you have the Prepaid with Drawdown feature enabled.

To use this field, you must set the X-Zuora-WSDL-Version request header to 137 or higher. Otherwise, an error occurs.

The period length of the rollover fund. If this field is set as optional, then you can modify the value. The limit for the value should be 1 which should be lesser than equal to the specified period that is lesser than equal to the validity period's length.

The price lookup formula defined for the product rate plan charge, which is used to identify the correct and relevant charge definition based on the context.

For more information, see Price lookup in Attribute-based Pricing.

Notes:

• This field is available only if the Attribute-based Pricing feature is enabled.
• To use this field, you must set the X-Zuora-WSDL-Version request header to 138 or higher.

Class associated with the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Deferrred revenue account associated with the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Department associated with the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Specifies whether the corresponding item in NetSuite is visible under child subsidiaries. Only available if you have installed the Zuora Connector for NetSuite.

ID of the corresponding object in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Status of the product rate plan charge's synchronization with NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Type of item that is created in NetSuite for the product rate plan charge. Only available if you have installed the Zuora Connector for NetSuite.

Location associated with the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Recognized revenue account associated with the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

End date condition of the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Start date condition of the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Only available if you have installed the Zuora Connector for NetSuite.

Subsidiary associated with the corresponding item in NetSuite. Only available if you have installed the Zuora Connector for NetSuite.

Date when the product rate plan charge was synchronized with NetSuite. Only available if you have installed the Zuora Connector for NetSuite.